Step 1 - Take A Picture Using Imgsnp; Image Snap - Imgsnp; Imgsnp Modifiers - Honeywell HH1800 User Manual

distance of the scanner from the image/object. To achieve a high quality image, it is
recommended that you position your scanner 4-6" (10.2-15.2 cm) away from the image/object
you are capturing.

Step 1 - Take a Picture Using IMGSNP

Image Snap - IMGSNP

An image is taken whenever the hardware trigger is pressed, or when the Image Snap
(IMGSNP) command is processed.
The image snap command has many different modifiers that can be used to change the look
of the image in memory. Any number of modifiers may be appended to the IMGSNP
command.
Example: You can use the following command to snap an image, increase the gain, and have the beeper
sound once the snap is complete: IMGSNP2G1B

IMGSNP Modifiers

P - Imaging Style
This sets the Image Snap style.
146
0P Decoding Style. This processing allows a few frames to be taken until the
exposure parameters are met. The last frame is then available for further use.
1P Photo Style (default). This mimics a simple digital camera, and results in a
visually optimized image.
2P Manual Style. This is an advanced style that should only be used by an
experienced user. It allows you the most freedom to set up the scanner, and
has no auto-exposure.
HH1800 User Guide