Table of Contents
Advertisement
_______________________________________________________________________________________________________________________
1. Introduction
a.
Servicing the F3 COMPACT includes fault finding, repair and maintenance and is
designed to be simple and fast thereby reducing the amount of time a detector is unusable.
Repair and maintenance is based on line replaceable units which can be fitted to a detector
without the need for adjustment or calibration. Additionally, serviceable line replaceable units
can be exchanged between detectors as required.
b.
Line replaceable units are components or sub assemblies of the F3 COMPACT that can
be purchased from Minelab for the purpose of repairing the F3 COMPACT. Line replaceable
units include the following:
3004-0044
3004-0045
3004-0046
3004-0047
3004-0048
3004-0049
3004-0050
3004-0051
3004-0052
3004-0053
3004-0054
3004-0056
3004-0057
3004-0058
c.
Servicing the F3 COMPACT can be conducted within the field (under clean and dry
conditions) or at local service centres. No special tools are required, but it is recommended
that the F3 COMPACT Service Tool Kit be used.
d.
Servicing the F3 COMPACT is restricted to the exchange of line replaceable units
following the identification of a faulty sub-assembly. Servicing DOES NOT include any repairs to
printed circuit boards as this is only conducted at a Minelab facility.
e.
This manual should be read in conjunction with the F3 COMPACT Operations Manual.
Additionally, from time to time, Minelab will issue Technical Service Notes which serve to
supplement the information contained in this manual.
f.
Any questions regarding this manual or any repair procedure can be directed to Minelab
at Countermine@minelab.com.au
Coil Kit
Coil Pivot Kit
Shaft Kit
Camlock kit
Armrest Kit with Slide
Armrest Kit
Handle Kit
Battery Compartment Kit
Battery Lid Kit
Main PCB Kit
Switches Kit
Wiring Loom Handle Socket Kit
Speaker Kit
Wiring Loom Earset Kit
F3 COMPACT Service Manual
3
Advertisement
Table of Contents
