Controls - Signalling; Starting-Ignition Switch - Dacia 1304 2004 Repair Manual

ANTI THEFT MECHANISM REPLACEMENT
The anti theft mechanism is placed on the right part of the steering column and has the
purpose to starter control when electric wiring is connected, being provided in the same
time also with a steering locking device, with anti theft lock.
P I
OSITION NTERPRETATION
Stop anti theft
S
( parking )
Accessories
A
Intermediary
I
Engine contact
M
Starter contact
D
Subject to the vehicle manufacturing variant, on the anti theft mechanism there is not
any more marked G position ( garage ) because does not enable the taking out of the key in
this position but helps in pin unblocking for removing the mechanism from the steering
column.

CONTROLS - SIGNALLING

STARTING - IGNITION SWITCH
( -
STARTING IGNITION SWITCH
C
ONTACT KEY POSITIONS
This position enables the introduction and taking out of
the key from the contact switch. When key is taken out
from the contact switch, the steering is b locking. Unblock-
ing is obtained by introducing the key in the contact switch
and if necessary, the easy rotation in both senses of the
steering wheel.
In this position, accessories are voltage supplied,
protected by means of a bridge fuse F 02
This position enables the removing of the anti theft
mechanism, after its attachment screw on the steer i ng
column has been dismounted and the mechanism
blocking pin has been pressed.
In this position, the steering is not blocked and all
consumers are voltage supplied, protected by means
of the bridge fuse F 01 ( inside fuse box) as well as
the injection system relays.
This position enables the voltage supply of the
starter and engine starting, after that key is returning
in M position
The mechanism is such built not to enable the passage
in succession of the contact key in the D position
without returning in S position
84 - 1
)
O
BSERVA TIONS
84