Bellows Towards To The Gearbox - Dacia 1304 2004 Repair Manual

BELLOWS TOWARDS TO THE GEARBOX

Joint bellows replacement - the part towards the gearbox – is to be performed with
dismounted transmission.
1. Tulip
2. Assembled tripod
3. Assembled type
4. Casing
5. Collar
6. Bellows
7. Ruber ring
8. Transmission shaft
Dismount the transmission off the
vehicle.
Dismount the collar (5) maintaining the
bellows (6) on the tulip.
Dismount the rubber ring (7).
Cut the bellows on the entire length.
Remove maximum possible of the
grease.
By means of a pair tongues, strain the
tulip tilt towards the outside in the three
zones of the tulip ramps.
Dismount the tulip.
Dismount the tulip safety ring.
Depress the tripod off the shaft.
NOTE:
The sliding blocks and the needles are in pairs. Do not dismount the sliding off the
tulip. Do not ever use solvent for parts washing.
DRIVE SHAFTS
GI 69 JOINT BELLOWS REPLACEMENT
D
ISMOUNTING
29 - 5
29