REPLACEMENT OF THE NOISE ABSORBER BEARING
D
ISMOUNTING
1. Noise absorber bearing
2. Elastic bushings
3. Inside support washer
4. Outside support washer
5. Safety ring
Place the car on the elevator.
Dismount the wheel on the noise absorber bearing side (right side).
Dismount:
- the steering auxiliary connecting rod;
- the protection bellows.
Rotate the steering wheel until the rack is withdrawn.
Dismount:
- the safety ring;
- the outer washer.
Remove, by means of a screw driver:
- the elastic rings;
- the worn noise absorber bearing.
STEERING ASSEMBLY
NOISE ABSORBER BEARING
36 - 5
36