Pusher Adjustment - Dacia 1304 2004 Repair Manual

The pusher clearance adjustment shall be performed taking into account the wear
degree of the following parts: rack, pusher, casing.
The adjustment method shall be
observed every time it is necessary to alter
the spacers clearance, in order to maintain
a normal operation of the steering gear box.
1. Cap
2. Elastic washer
3. Sprig
4. Adjustment washer
5. Pusher
The operation shall be performed after
removing the steering gear box off the
vehicle.
Clamp the steering gear box in the vice.
Dismount:
- the pusher cap (1);
- the adjustment washers (4);
- the elastic washer (2);
- the spring (3);
- the pusher (5).
Carefully clean the pusher seat and the parts that have been dismounted.
Grease the parts with special grease containing MoS2.
Mount the parts in the pusher seat, except for the elastic washer.
Make a comparator support out of an old cap.
NOTE: Do not rotate the drive pinion while the cap is dismounted.
STEERING ASSEMBLY

PUSHER ADJUSTMENT

ADJUSTMENT METHOD
36 - 7
36