Condenser - Dacia 1304 2004 Repair Manual

62
Condenser has the purpose to achieve the second heat exchange, where the refrigerant fluid
by condensation, is transmitting outside the abstracted heat. When coming out from the con-
denser, the refrigerant fluid is liquid, at high pressure.
The condenser is made of aluminum, Harrison type, with parallel flows.
It is mounted in front of the vehicle's radiator in the front part of the vehicle and is ensuring the
abstraction of heat of the refrigerant fluid.
In order to grant the optimum condenser operation, its outside surfaces must be always clean
and air penetration not to be stopped. Also, the condenser pipes must not show deformations.
D
ISMOUNTING
Disconnect the battery.
Drain the cooling circuit.
Dismount the radiator.
Drain the refrigerant circuit.
Dismount the pipes (1) and (2) connected to the condenser.
Disconnect the electric connector of the cooling GMV .
Dismount the condenser attachment screw (3) on the upper crossbar.
Detach the condenser.
Separate the GMV from the condenser.
ATTENTION : Avoid the possible deformation of the ducts and finned plates.
R
EMOUNTING
Perform the dismounting operations in the reverse order.
Tighten at the required moment (1,6 daNm ) the refrigerant fluid pipes attached at the con-
denser.
Tighten at the required moment (1,1 daNm) the condenser attachment screw on the upper
crossbar.
AIR CONDITIONING

CONDENSER

62 - 6