DRIVING BELTS TIGHTENING AND TIGHTENING CHECKING
The checking of the belt tightening may be done by means of the MOT 557 device which
has two scales; one shows the arrow's value ,and the other implicitly translates the value
of the tension ( force ).
When checking and adjusting the belts tension, observe the following procedure:
∗ stretch the belt for which the tension is to be determined;
∗ place the big "O" ring on the scale at the arrow imposed value ( 2mm ; 4,5mm;
3,5 mm or 7,5 mm for the belts 1; 2 ; 3 or 4);
A
B
RROW
ELT
(mm)
between compressor
1
- alternator
2
between crankshaft-
compressor
3
between crankshaft-
water pump
between crankshaft-
water pump -
4
alternator
* place the small "O" ring on the scale at zero value;
∗ place a metallic graduated rule on both pulleys;
* place the device at half- and vertical on the rule ( 1- distance between pulleys axles).
VALUES AND SETTINGS
Arrow
Ring 0 big
f
M
OUNTING
14 +/- 15%
2
17 +/- 15%
4,5
7.5 +/-15%
3,5
30 +/-15%
7,5
07 - 5
Force
Ring 0 small
F
N (N)
ORCE
A
5 min. A
FTER
FTER
14 +/- 15%
11 +/- 15%
17 +/- 15%
13 +/- 15%
7.5 +/- 15%
5.5 +/- 15%
30 +/-15%
-
07
V
EHICLE
OPTIONALS
500 km.
with AC
without AC