41
ASSEMBLED FRONT LONGITUDINAL GIRDER
This operation shall be performed only on the repair bench. For the specific supports
mounting on the bench, please see the 40 chapter.
Dismount the damaged elements, which
are in contact with the longitudinal girder.
Detach the welding points of the longitu-
dinal girder (1) which are in connection
with:
- the front cross bar in the area (2);
- the front wing lining on the outline (3);
- the steering cross bar in the areas (4),
(5);
- the gusset in the area (6);
- the pedal and central floor in the area (7);
- the iron plate in the area (8).
Detach the damaged element.
Straighten the areas resulted by dismounting.
Grind the areas resulted by dismounting.
LOWER STRUCTURE
REPLACEMENT
D
ISMOUNTING
41 - 2
2
3