Inlet exhaust manifold nuts ....................................................................1,8
Attachment nuts of the tube on the inlet exhaust manifold ....................1,8
D
ISMOUNTING
Disconnect the battery.
Dismount the injector valve body ( see chapt." Replacement of the injector valve body" ).
Dismount the starter protection shield.
Dismount the 3 attachment nuts of the inlet-exhaust manifold.
Extract the inlet-exhaust manifold.
R
EMOUNTING
Perform in reverse order the dismounting operations.
Clean the assembly surface.
Replace the gasket of the inlet-exhaust manifold.
Replace the gasket of the tube.
Tighten the nuts at the required moment.
FUEL MIXTURE
INLET EXHAUST MANIFOLD
T
IGHTENING TORQUES
12 - 3
( daNm )
12