33
- Anti roll rod shaft attachment screw.............................................. 1,5 daN.m
- Anti roll rod-auxiliary connecting rod connection axles nut ........... 8 daN.m
D
ISMOUNTING
Loose the rear wheels nuts.
Lift the vehicle on a two columns elevator.
Dismount the rear wheels nuts.
Dismount the rear wheels.
Unscrew the connections of the rear anti roll rod (1) with connecting rods (2).
Dismount the connections (3) of the rear anti roll rod with the rear axle.
Dismount the anti roll rod.
R
EMONTING
Grease the attachment screws of the anti roll rod with special grease MoS2.
Mount the anti roll rod on the rear axle.
Attach the anti roll rod to the connecting rods.
Tighten at the required moments : the anti roll rod- auxiliary connecting rod connection axles
nuts and screws, anti roll rod attachment screws on the rear axle.
Mount the rear wheels.
Lower the vehicle from the elevator.
The rear anti roll rod diameter is: φ φ φ φ 24 mm.
REAR BEARING ELEMENTS
REAR ANTIROLL ROD
T
IGHTENING MOMENTS
3
3
33 - 36
2
2
1
1