Brake Caliper - Dacia 1304 2004 Repair Manual

T
IGHTENING MOMENTS
Wheel nuts
Rigid sewerage-connection screws
D
ISMOUNTING
Drain the brake fluid tank.
Lift the vehicle by means of a two columns
elevator
Dismount the wheel.
Dismount:
-safety wedges;
-the wedges (B) by lateral sliding.
Disconnect the brake wear sensor.
Unscrew the rigid sewerage-connection
from the brake flexible hose.
Remove the safety washer of the flexible
connection from the stopper and dismount the
caliper.
Unscrew the flexible connection from caliper and the purging screw.
R
EMOUNTING
Check:
- the state of flexible connection;
- the state of brake disk;
- the state of brake pads;
- the state of protection bellow.
Replace the damaged or worn parts.
Fill the caliper with brake fluid.
Mount on the caliper:
- aerating screw;
- the flexible connection with a new
copper gasket.
Push the piston by means of the FR 500
device.
FRONT BEARING ELEMENTS

BRAKE CALIPER

( daNm )
31 - 13
9
1,5
31