Intermediary Longitudinal Girder - Dacia 1304 2004 Repair Manual

41
This operation shall be performed only on the repair bench. For the specific supports
mounting on the bench, please see the 40 chapter.
D
ISMOUNTING
Dismount the elements, which are in contact
with the intermediary longitudinal girder.
Detach the welding points of the intermediary
longitudinal girder (1) that are connecting with:
- the longitudinal girder in the area (4);
- the pedal floor in the area (2);
- the lateral cross bar in the area (3);
- the central floor in the area (5);
- rear longitudinal girder in the area (7).
Straighten the areas resulted by dismounting.
Grind the areas resulted by dismounting.
R
EMOUNTING
Position and center the new element.
Check the correct positioning of the

intermediary longitudinal girder.

Weld the intermediary longitudinal girder
following the assembly outliners 2,3,4,5,6.
Protect the new element with a corrosion
preventing and noise absorbent product.
LOWER STRUCTURE
INTERMEDIARY LONGITUDINAL GIRDER
REPLACEMENT
41 - 4
1
6
4
2
3
5