Wheels And Tyres - Dacia 1304 2004 Repair Manual

The wheels identification marking is represented in two ways:
- engraved marking for steel rims;
- cast marking for aluminum rims.
The marking enables acknowledgment of the main wheels dimensions criteria.
This marking may be:
- complete.
Example: 5 J 14 3 CH 48, or
- simplified.
Example: 5 J 14
A
Wheels Width
type (in inches) edge profile
5 J14 5
3CH48
5 J14 5
5CH48
The wheel bolts (studs) are situated on a diameter of 100 mm.
Maximum axial runout: 1,2 mm measured on the rim edge ( in G ).
Maximum radial runout: 1,2 mm measured on the bedding side of the tires beads.

WHEELS AND TYRES

CHARACTERISTICS
RIMS
B
The rim φ Nominal
(in inches)
Under tire bead
J
J
35 - 1
C D
Number of Tire
fixing points staffing
14 3
14 5
35
E F
Offset
( in mm )
profile
CH 48
CH 48