42
D
ISMOUNTING
Dismount the elements, which are in contact with
the headlamp support.
Detach the welding points of the head lamp (1)
support which are in connection with :
- the radiator upper cross member in the area
(3);
- the reinforcement in the area (4);
- the lower part of the front wing lining in the
area (5);
- the front wing lining in the lateral part in the
(6) area.
Straighten the areas resulted by dismounting.
Grind the areas resulted by dismounting.
R
EMOUNTING
Position and center the new element.
Check the correct positioning of the head lamp
support.
Weld the headlamp support (1) following the
assembling outliners 2,3,4,5,6.
Protect the welding with a corrosion-preventing
product.
Mount the elements, which are connections with
the headlamp support.
UPPER FRONT STRUCTURE
HEAD LAMP SUPPORT
42 - 4
1
3
4
5
2
6