SIDE OPENING ELEMENTS
47
FRONT DOOR OUTSIDE PANEL
D
ISMOUNTING
Dismount the front door and the elements which are in contact with this.
Cut the outside panel of the door following the outliner (1).
Unscrew the screws (2) from the joint of outside panel-glass frame.
Adjust, if necessary, the extensor (3).
M
M
2
3
1
5
4
R
EMOUNTING
Apply a strip of zinc on the caisson.
Apply a sealant material layer in the area (4).
Position the new outside plate and weld in the (2) area.
Fit the outside panel on the door caisson by folding in the area (5).
Remount the elements which are in connection with the front door.
47 - 2