Non Drive Pipe Rear Axle - Dacia 1304 2004 Repair Manual

33
It is a drawn, rigid type axle.
Attachment to the chassis is performed by means of the half axial blades springs and of the
hydraulic shock absorbers.
Provided for Dacia 1305, 1307 F.
Values of steering angles:
- parallelism..............................0
- pivot cross angle.................... 0
- tightening positio n of the leaf spring s
.................................G = 162 mm
The parallelism and the pivot cross
inclination angle are not adjustable.
D
ISMOUNTING
NOTE: It is assumed that the axle is dismounted and fixed on the support.
Dismount the wheel.
Detach the drum from the wheel hub by unscrewing the three M 8 sunk screws.
Dismount the drum cap by means of the RO 441 tongues.
Straighten the nut retainer and unscrew the steering knuckle nut.
Take out:
- the retainer;
- the support washer.
Extract the hub by means of the PF 235 A extractor.
Depress and recover the two conical balls bearings.
NOTE:
If the sealing ring (annular oil seal) has marks of wear on the sealing surface, it
shall be replaced.
REAR BEARING ELEMENTS

NON DRIVE PIPE REAR AXLE

NON DRIVE PIPE REAR AXLE
DACIA 1305, 1307 F
CHARACTER ISTICS
0
0
WHEEL HUB
33 - 22