Clutch Shaft Annular Oil Seal Replacement - Dacia 1304 2004 Repair Manual

CLUTCH SHAFT ANNULAR OIL SEAL REPLACEMENT

D
ISMOUNTING
Clutch annular oil seal replacement requires gearbox dismounting from the vehicle.
Dismount the gearbox from the vehicle.
Dismount the pressure bearing.
Dismount the clutch casing.
Dismount the annular oil seal clutch shaft.
R
EMOUNTING
NOTE: Before mounting ,the annular oil seal shall be immersed in 80W/90 oil.
Mount the new annular oil seal by means of
the CV 488 device, composed of:
- a pipe (1) for mounting the annular seal
oil.
- a pipe (2) for protection of the annular
seal oil.
Clean the assembling surface clutch casing
with the half crankcases and apply a layer of
sealing paste LOCTITE 518.
Mount the clutch casing ,using the
protector (2) for protection of the annular seal
oil.
Tighten the screws at the required moment:
M8 : 2-2,8 daNm;
M10 : 3,2-4 daNm.
Mount the pressure bearing.
Mount the gearbox on the vehicle.
Adjust the clutch stroke (2,5 - 3,5 mm at the declutching lever end).
MANUAL GEARBOX
(on vehicle )
21 - 49
21