Table of Contents

Advertisement

21
Dismount the gearbox off the vehicle
Dismount the reverse driving lamp contact.
Dismount the clutch casing.
DISMOUNTING OF THE COUPLING MECHANISM 4X4 (G.B. 51 C)
Dismount the attachment pin of the
connection bolt (1) between the vacuum
capsule shaft and the control lever and take
out the bolt.
Dismount the vacuum capsule support
from the gearbox casing.
Take out the safety washer (2) of the
control lever fixing.
Dismount the control lever (3) of the front
transmission.
Dismount the threaded plug (4) for stroke
limiting.
Unscrew the attachment screws (5) of the
deflector and flange on the differential hub.
Take out the deflector and flange.
Unscrew the attachment differential cover
screws (6) on half crankcase.
Take out the differential cover assembly
and its paper gasket.
Dismount the bearing from the differential
hub by means of an extractor
( only if this is used and must be replaced ).
Take out the annular oil ring from the
differential cover by means of a screwdriver.
MANUAL GEARBOX

REPAIR

21 - 16
1
4
3
2
2
5
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents