MECHANICAL ELEMENTS CONTROLS
37
CLUTCH CABLE – CLUTCH STROKE ADJUSTMENT
D
ISMOUNTING
Dismount the clutch lever cable.
Dismount the attachment clip (1) of the
pedal.
Push the shaft rightward and take out the
pedal.
Release the spring (2) and the shaft (3) of
the fork.
Dismount the fork.
Release the cable f r om the housing stopper
on the pedal support and dismount it.
R
EMOUNTING
Perform the dismounting operations in the reverse order.
Grease :
-the pedal shaft;
-the fork shaft.
Adjust the clutch stroke.
CLUTCH GEAR STROKE ADJUSTMENT
Loosen the lock nut (1).
Tighten or unscrew the nut (2) until
obtaining the 2,5-3,5 mm stroke at the lever
end.
Lock the lock nut.
CLUTCH CABLE REPLACEMENT
37 - 16