Erasing The Imaging Plate; Switching The Unit Off - Air Techniques ScanX Swift View Installation And Operating Instructions Manual

Hide thumbs Also See for ScanX Swift View:
Table of Contents

Advertisement

Available languages

Available languages

Usage
EN-
Remove the empty barrier envelope.
US
Remove the PSP and prepare it for recording
another X-ray image.
Transmitting image data to the computer
X-ray images created using the touch screen of
the device are saved to a memory card. These X-
ray images can be imported into an imaging soft-
ware via a network connection.
Connect the unit to the network.
Start the imaging software.
Start the image import via the imaging software
(further information can be found in the manual
of the imaging software).
Save the image data.
The image data on the memory card is erased
automatically as soon as the transfer has been
successfully completed.
11.4

Erasing the imaging plate

The image data is erased automatically after
scanning.
If you do not want the image data to be erased,
this function can be disabled for the current
scanning process by selecting Disable erasing
light on the touch screen of the unit.
The special ERASE mode only activates the era-
sure unit of the imaging plate scanner. No image
data is scanned.
34
The PSP needs to be erased using the special
mode in the following cases:
– The first time the PSP is used, or if it is stored
for more than one week.
– Due to an error, the image data on the PSP
has not been erased (software error message).
Erasing the PSP via a computer
Select the special ERASE mode in the soft-
ware.
Scan the PSP (see "11.2 Scanning the image
data via a computer").
Erasing the PSP via the touch screen
On the touch screen, tap on Quick scan.
Select the scanning mode ERASE.
Scan the PSP (see "11.3 Scanning image data
via the touch screen on the unit").
11.5

Switching the unit off

Press the on/off switch
As soon as the unit has shut down it switches
off completely. The touch screen is off.
After you switch off the unit, wait 10 s
before switching the unit on again.
Use of a protective cover
The protective cover protects the device against
dirt and dust during extended periods in which it
is not used.
WARNING
Danger of suffocation
Store the protective cover out of the
reach of children.
2142100008L41 2202V007
for 3 seconds.

Advertisement

Table of Contents
loading

This manual is also suitable for:

G8500a

Table of Contents