Air Techniques ScanX Swift View Installation And Operating Instructions Manual page 7

Important information
1 About this document
These installation and operating instructions are
an integral part of the unit.
Air Techniques shall not be held liable and
offers no guarantees of the safe and
smooth operation of this unit if you fail to
comply with notes and instructions con-
tained in these Installation and Operating
Instructions.
The German version of the installation and oper-
ating instructions is the original manual. All other
languages are translations of the original manual.
These operating instructions are valid for ScanX
Swift View, order number: G8500 (2142100510).
1.1 Warnings and symbols
Warnings
The warning notes in this document highlight
possible injury to persons or damage to machi-
nery.
They are marked with the following warning sym-
bols:
General warning symbol
The warnings are structured as follows:
SIGNAL WORD
Description of type and source of
danger
Here you will find the possible conse-
quences of ignoring the warning
Follow these measures to avoid the
❯
danger.
The signal word differentiates between different
levels of danger:
– DANGER
Direct danger of severe injury or death
– WARNING
Possible danger of severe injury or death
– CAUTION
Risk of minor injuries
– NOTICE
Risk of extensive material/property damage
2142100008L41 2202V007
Important information
Miscellaneous symbols
These symbols are used in the document and on
or in the unit:
Note, e.g. specific instructions regarding
the efficient use of the unit.
Part number
Serial number
Medical device
Health Industry Bar Code (HIBC)
Batch name
CE mark
CE labeling with the number of the noti-
fied body
Manufacturer
Date of manufacture
Distributor
Dispose of correctly in accordance with
EU Directive 2012/19/EU (WEEE).
Take note of the accompanying electronic
documents.
Please note the operating instructions.
Wear hand protection.
Disconnect all power from the unit.
Do not reuse
DC current
EN-
US
3