Air Techniques ScanX Swift View Installation And Operating Instructions Manual page 22

Installation
EN-
7 Installation
US
7.1 Setting up the unit
NOTICE
Damage to sensitive components of
the unit due to shocks or vibrations
Do not expose the unit to any strong
❯
vibrations or shocks.
Do not move the unit during operation.
❯
Portable and mobile HF communication devices
can interfere with the effectiveness of electrical
medical devices.
The unit can be set up as a tabletop unit or
mounted on a wall using the wall bracket.
The load-bearing capacity of the table or wall
must be suitable for the weight of the unit (see
"4 Technical data").
Setting the unit on a table
To prevent errors when scanning the
image data, install the unit so it is not
exposed to vibrations.
Place the unit on a firm, horizontal surface.
❯
18
7.2 Removing the protective film
from the touch screen
Grasp one corner of the protective touch
❯
screen film and peel it off carefully.
7.3 Attaching the Stylus
The stylus is held on the unit by a magnet.
❯
Place the stylus in the indentation provided.
7
kg
7.4 Checking the memory card
CAUTION
Loss of image data due to unex-
pected insertion or removal of the
memory card
Insert or remove the memory card only
❯
when unit is switched off.
2142100008L41 2202V007