Air Techniques ScanX Swift View Installation And Operating Instructions Manual page 20

Installation
EN-
Installation
US
Only qualified specialists or persons
trained by Air Techniques may install,
connect, and commission the unit.
6 Requirements
6.1 Installation/setup room
The room chosen for set up must meet the fol-
lowing requirements:
– Closed, dry, well-ventilated room
– It should not be a room made for another pur-
pose (e.g. boiler room or wet cell)
– Max. light intensity 1000 Lux, no direct sun-
light at the place of installation of the unit
– There should be no major fields of interference
(e.g. strong magnetic fields) present that can
interfere with the proper operation of the unit.
– Ambient conditions correspond to "4 Techni-
cal data".
16 2142100008L41 2202V007