Table of Contents
Advertisement
4 Operation
4.3.7
Configuration
Configure the device (CPU) and modules and determine their parameters
The "Configuration" area comprises the following areas (device-specific example shown):
•
Device manager: Device settings (device language, start-up behavior, partition change), device des-
ignations, time zone/NTP, date and time, customer-specific linearization (as of system version 5)
•
System bus: Master (settings relating to the system bus; see below), module... (module-specific con-
figuration parameters; see below)
•
Data carrier management (as of system version 7): Use of network drives
•
Ethernet: Configuration of the LAN interface concerned (e.g., IP address, DNS server)
•
Web server: Activation, HTTP or HTTPS, port numbers
•
Email: Settings for sending emails
•
PLC configuration: Units for absolute and relative temperature values (for the PLC application), con-
figuration of program generators, analog and digital variables (as of system version 5)
•
PLC parameters: Display of the configuration structures that were created using the CPV Editor
(CPVE)
•
Programs: Creation of programs using the program editor (setpoint values, operating contacts)
•
System status UI: screensaver (activation and waiting period)
•
Real-time processing (as of system version 6): Configuration of data recording
•
Datastore gateway (as of system version 6): Configuration of the connection to the database
•
Cloud gateway: Configuration of the connection to JUMO Cloud (as of system version 4)
•
Wtrans gateway (only for variTRON 300): Settings for using the JUMO Wtrans transmitters (as of
system version 5)
•
Node-RED (as of system version 4): Activation of programming tool Node-RED
•
Batches (as of system version 6): Configuration of batch reporting
Details can be found in the "Configuration" chapter.
46
Advertisement
Table of Contents
