Table of Contents
Advertisement
5.14
Cloud gateway
Here the connection to the JUMO Cloud is configured (available as of system version 4). Before this, the
device must be configured as a data source in the JUMO Cloud.
Parameter
Connection to the
cloud
Cloud server
Individual URL for
configuration
(as of system ver-
sion 05)
Individual URL for
MQTT
(as of system ver-
sion 05)
Device ID
Password
Permanent live
mode
Cycle time for live
data [ms]
NOTE!
The permanent live mode is usually used during startup; it should be deactivated after startup. This
avoids costs that may be incurred for the transmission of the data (e.g. in the mobile network).
Selection/data input
Inactive
Active
JUMO Cloud
Individual
Enter URL
Enter URL
Enter device ID
Enter password
Inactive
Active
250 to 25000
5 Configuration
Description
Connection to the cloud server
No connection
The connection is active.
Selection of the cloud server
The JUMO Cloud is used.
Individual settings are ignored.
The cloud server is determined by an individual
URL.
URL of the cloud server
If the JUMO Cloud is not used, a different URL can
be entered here.
URL of the cloud server (MQTT protocol)
If the JUMO Cloud is not used, a different URL can
be entered here.
ID used by the device (data source) to authenticate
itself to the cloud.
The device ID is automatically assigned during
configuration in the cloud.
Password used by the device (data source) to au-
thenticate itself to the cloud.
The password is automatically assigned during
configuration in the cloud.
In permanent live mode, the live data is perma-
nently sent to the cloud (see cycle time), regard-
less of the configuration in the cloud.
No permanent live mode
The transfer of live data depends on the configura-
tion in the cloud
The permanent live mode is active.
Interval at which live data is sent to the cloud when
permanent live mode is active.
89
Advertisement
Table of Contents
