Table of Contents
Advertisement
5 Configuration
5.2
Device manager
Device settings
Parameter
Device language
Start-up behavior
Partition change
after [x] start-up
errors
Device designations
Parameter
Device name
DNS name
Time zone/NTP
Parameter
Time zone
NTP active
70
Selection/data input
Select language
Run
Stop
Last status
5 to 50
Selection/data input
Enter text (or use existing text) Designation of the device
Enter text (or use existing text)
The DNS name must not be
used more than once in the
network.
Selection/data input
Select time zone
Yes
No
Description
Language in which the texts are shown on the de-
vice display.
Texts that do not have a translation in the selected
language are displayed in English or German (or,
if applicable, in the so-called developer language).
System status that is adopted by the device once
it switches on:
"Run" system status
"Stop" system status
Last system status before the switch-off
After [x] errors during the boot process, the device
boots from the secondary partition (backup parti-
tion).
Afterwards there is a one-time possibility to boot
from the primary partition again with REBOOT
SYSTEM. If this fails, a software update is re-
quired.
Possible errors during the boot process:
•
Error in the device software
•
Interruption of the voltage supply
Description
The device name is used in the web application, in
the setup program, and, if applicable, in other PC
programs. It can also be used by DeviceScan and
the CODESYS application, for example for identi-
fication purposes.
Name by which the device can be identified and
addressed in the network.
The name set per default is unique as it comprises
the product group number and the MAC address.
Description
Time zone in which the device is operated.
The device's time settings can be synchronized
with a time server using the Network Time Protocol
(NTP).
Synchronization is active.
Synchronization is not active.
Advertisement
Table of Contents
