6.9
Writing Parameters to C Controller Module
Write parameters to a C Controller module.
[Online] [Write to PLC]
Operating procedure
The system parameter and CPU parameter are related to the operation of a C Controller module. The module
parameter and module extended parameter are related to the use and operation of an I/O module or an
intelligent function module.
1.
Select "System Parameter/CPU Parameter" and
"Module Parameter".
2.
Click the [Execute] button.
3.
After writing to a C Controller module is completed, click
the [Close] button.
6 PROCEDURE BEFORE OPERATION
6.9 Writing Parameters to C Controller Module
6
47