Table of Contents
Advertisement
QoS Port Shaping
QoS Port Shaping facilitates setting a fixed rate (Kbps) for each of the Ethernet ports.
1. In the left navigation bar, click
2. Fill in the fields, using the information in the table below.
3. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
Field Name
Interface
Egress Shaping Rate (Kbps)
Egress Burst Size (bytes
Ingress Policing Rate (Kbps)
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Advanced Setup
>
Quality Of Service
Description
Each entry in this column represents one of the Ethernet LAN ports on
the gateway.
Enter the data rate for packets on the specified Interface. Options are 1
- 1,000,000 Kbps. The default is -1 (no shaping).
Enter the burst size to be applied to packets in the defined queue.
Options are 1600 bytes or greater. The default is 0 (no size limit).
If you enter a value of -1 (disabled) in the
value in this field is ignored.
Enter data rate for policing incoming packets in the defined queue. The
default is -1 (no policing).
>
QoS Port
Shaping. The following page appears.
Egress Shaping Rate
field, the
75
Advertisement
Table of Contents
