Table of Contents
Advertisement
Table 42 SR6602-X2 panel LED description
LED
CF
(yellow/green)
PWR1
(red/green)
PWR2
(red/green)
FAN
(red/green)
ALM
(red)
RUN
(green)
LINK
(yellow/green)
ACT
SFP+LINK/AC
T
(yellow/green)
Status
Description
No CF card is in position or the CF card cannot be
Off
recognized.
Steady green
A CF card is in position and has been detected.
The system is accessing the CF card. In this state,
Flashing green
do not remove the CF card.
Steady yellow
It is a non H3C CF card.
Off
The power module is not in position.
Steady green
The power module is supplying power properly.
No power is input or the power module is faulty
Steady red
when PWR2 is operating properly.
Off
The power module is not in position.
Steady green
The power module is supplying power properly.
No power is input or the power module is faulty
Steady red
when PWR1 is operating properly.
Off
No power is input or the fan tray is not in position.
Steady green
The fan tray is working properly.
Steady red
The fan tray is faulty.
The system is operating properly and there is no
Off
alarm.
A fault has occurred. In this state, check the system
Steady red
log immediately.
Flashing fast at
The system is seriously faulty. An immediate action
8 Hz
is needed.
Off
The system is powered off or the router is faulty.
Flashing at 1 Hz
The router operates properly as configured.
Software is being loaded or the router does not
Flashing at 8 Hz
start working yet.
Off
The corresponding interface is not connected.
Steady green
A 1000 Mbps link is present.
Steady yellow
A 10/100 Mbps link is present.
Off
No data is being received or transmitted.
Flashing yellow
Data is being received or transmitted.
Off
No link is present.
Steady green
A 10 Gbps link is present.
Flashing green
Data is being received or transmitted at 10 Gbps.
Steady yellow
The transceiver module check is not passed.
83
Advertisement
Table of Contents
