Sr6602-X2 Panel Leds - H3C SR6602-X1 AC Installation Manual

LED
(red)
(green)
(yellow/green)
(yellow/green)
(yellow/green)

SR6602-X2 panel LEDs

Figure 75 SR6602-X2 front view
Status
Off
ALM Steady red
Flashing fast at 8 Hz
Off
Flashing at 1 Hz
RUN
Flashing at 8 Hz
Off
LINK Steady green
Steady yellow
Off
ACT
Flashing yellow
Off
Steady green
SFP0
through
Flashing green
SFP3
Steady yellow
Flashing yellow
Off
Steady green
GE0
Flashing green
through
GE3
Steady yellow
Flashing yellow
Description
The system is operating properly and there is no
alarm.
A fault has occurred. In this state, check the system
log immediately.
The system is seriously faulty. An immediate action
is needed.
The system is powered off or the router is faulty.
The router operates properly as configured.
Software is being loaded or the router does not start
working yet.
The corresponding interface is not connected.
A 1000 Mbps link is present.
A 10/100 Mbps link is present.
No data is being received or transmitted.
Data is being received or transmitted.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100 Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100
Mbps.
82