Item
Interface type
Frame format
Interface speed and duplex mode
Combo interface
Copper Ethernet port
Table 34 Copper Ethernet port specifications
Item
Connector
Interface type
Frame format
Interface speed and duplex mode
NOTE:
• The media dependent interface (MDI) standard is typically used on the Ethernet port of network
adapters. The media dependent interface crossover (MDI-X) standard is typically used on hubs
or LAN switches.
• For a combo interface, you can use either the copper port or the fiber port. To switch between the
copper and fiber ports, use the combo enable { copper | fiber } command in interface view.
Fiber Ethernet port
Table 35 Fiber Ethernet port specifications
Item
Connector type
Transceiver module type
Interface standards
Operating mode
Specification
Automatic MDI/MDI-X
Ethernet_II
Ethernet_SNAP
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
Specification
RJ-45
Automatic MDI/MDI-X
Ethernet_II
Ethernet_SNAP
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
Specification
LC
SFP
802.3, 802.3u, and 802.3ab
100/1000 Mbps, full duplex
76