Press the ejector button next to the CF card. The ejector button moves outward so that it
1.
projects from the panel.
Figure 56 Press the ejector button
Press the ejector button again. This ejects the CF card partially out of its slot. Pull the CF card
2.
out of its slot.
Figure 57 Pull the CF card
To install a new MIM, see
3.
NOTE:
To protect the CF card, place it into an antistatic bag.
Replacing a transceiver module
WARNING!
• Do not stare into the optical fibers.
• When removing a transceiver module, do not touch the golden finger of the transceiver module.
NOTE:
When replacing a transceiver module, make sure the two transceiver modules connected by the
same optical fiber have the same wavelength.
To replace a transceiver module:
"Installing a CF
card."
42