H3C SR6602-X1 AC Installation Manual page 100

•
X—Number of the slot where the FIP resides.
Different HIMs/MIMs on the same FIP have the same slot number X.
•
Y—Sub-slot number, the number of the slot where the HIM/MIM resides on the FIP.
Different interfaces on the same HIM/MIM have the same sub-slot number Y.
•
Z—Sequence number of the interface on the HIM/MIM.
For each type of interface, the sequence number Z starts from 0 on the HIM/MIM.
Example
A MIM-2GBE module is installed on the FIP-10 in slot 1.
GigabitEthernet interfaces on the MIM-2GBE
If the MIM-2GBE is installed in slot 1 of the FIP-10, the GigabitEthernet interfaces are:
1.
GigabitEthernet 1/1/0
GigabitEthernet 1/1/1
If the MIM-2GBE is installed in slot 2 of the FIP-10, the GigabitEthernet interfaces are:
2.
GigabitEthernet 1/2/0
GigabitEthernet 1/2/1
91