Spe Leds; Him/Mim/Mic Leds - H3C SR6604-X Manual

Table3-12 SAP-28GE LED description
LED
1
(green)
2
(yellow/green)
3
(yellow/green)
4
(yellow/green)

SPE LEDs

For SPE LED description, see the corresponding datasheet.

HIM/MIM/MIC LEDs

For HIM/MIM/MIC LED description, see H3C SR6600/SR6600-X Routers Interface Module Guide.
Status
Off
Slow flashing (1 Hz)
RUN
Fast flashing (8 Hz)
Off
Status
Steady green
LEDs for
combo
Flashing green
fiber ports
GE16 to
Steady yellow
GE27
Flashing yellow
Off
Status
Steady green
LEDs for
combo Flashing green
copper
Steady yellow
ports GE16
to GE27
Flashing yellow
Off
Status
Steady green
LEDs for
SFP ports Flashing green
GE0 to
Steady yellow
GE15
Flashing yellow
Description
No power input is available or the SAP-28GE has
failed.
The SAP-28GE is operating correctly.
System software is being loaded or the SAP-28GE
is not operating.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the SAP-28GE when
system software is being loaded.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100 Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100
Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100 Mbps.
3-11