Configuring Basic Settings - H3C SR6602-X1 AC Installation Manual

#
sysname H3C
#
domain default enable system
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
user-group system
group-attribute allow-guest
#
interface NULL0
#
interface GigabitEthernet0/0/0
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface GigabitEthernet0/0/3
#
interface M-GigabitEthernet0/0/0
#
load xml-configuration
#
user-interface con 0
user-interface aux 0
user-interface vty 0 4
#

Configuring basic settings

To configure basic settings for the router:
Step
Set the current time and date
1.
Enter system view
2.
Enter Ethernet interface view
3.
Specify an IP address for the
4.
interface
Return to system view
5.
Command
clock datetime time date
system-view
interface interface-type
interface-number
ip address ip-address
{ mask-length | mask } [ sub ]
quit
37
Remarks
Optional
Available in user view
Available in user view
N/A
By default, no IP address is
assigned to any interface.
Available in any view