Angle Measurement And Outputting The Data - Sokkia SRX1 Operator's Manual

3. Enter the vertical and horizontal angles in the
Motor tab.
• Pressing [READ] in the second page displays
the coordinates data recorded in Program mode
(SDR). This data can be recalled and used for
settings.

Series SRX SDR Software Reference
Manual
• The target angle can be obtained from the
entered instrument station and target
coordinates. Instrument station data is entered
on the second page. Press [OK] to calculate
both the horizontal and vertical angle from the
coordinates.
4. After confirming the coordinates, press
[ROTATE]. The SRX moves to the point (target)
entered in step 3.
13.4

Angle measurement and Outputting the Data

The following explains angle measurement and the features used to output measurement results to a
computer or other external devices.

"6.1 CONNECTING TO EXTERNAL DEVICES", Cables: "27. OPTIONAL ACCESSORIES",
Output format and command operations: Interfacing with the SOKKIA SDR Electronic Field Book
and Command Explanations manuals
PROCEDURE
1. Connect SRX and external device.
2. Sight the target point.
3. Press [HV out] in Meas mode to output target
measurement results to the external device.
13. ANGLE MEASUREMENT
65