Lubrication And Servicing Intervals - MacDon R85 Operator's Manual

7.5.7 Lubrication and Servicing Intervals

To identify the various locations that require lubrication and servicing, refer to the following illustrations (organized
by the frequency of service that is required).
Every 25 Hours
Figure 7.11
A - Driveline Universals (2 Places)
D - Driveline Universals (2 Places)
NOTE: Use high temperature extreme pressure (EP2) performance with 1% max molybdenum disulphide
(NLGI grade 2) lithium base except where noted.
8. 10% moly grease is recommended for driveline shaft slip joint only.
169457
MAINTENANCE AND SERVICING
B - Driveline Universals (2 Places)
E - Driveline Shaft 8 (1 Place)
117
C - Driveline Shaft 8 (2 Places)
Rev. F