Setup; Loading Paper Or Transparencies In The Media Cassette - Kyocera FS-5800C User Manual

Setup

Loading Media
16
Loading Paper or Transparencies in the Media
Cassette
The printer is shipped with a media cassette (either Letter paper or A4 paper) installed.
The printer can also use five different trays as options:
Cassette
A4 Paper
A4 Transparency
Letter Paper
Letter Transparency
Legal Paper
Notes:
• Make sure that you load the correct media. Each tray is designed and labeled for
only paper or transparency. If you load the incorrect media type in a tray, it may
cause a jam.
• If you have the Paper Feeder PF-80 installed:
– If you wish to use the automatic cassette-switching feature (a large print job, for
example), make sure that all cassettes in the printer are the same media type
(paper only) and size.
– The transparency cassette should only be inserted in the upper or middle cassette
slots.
Note:
The printer does not automatically switch cassettes if the media type of the cassette is
Transparency.
1
Pull the media cassette out of the printer.
2 Remove all packaging materials from inside the media cassette;
refer to the instruction sheet attached to the cassette.
210 mm × 297 mm
210 mm × 297 mm
8.5" × 11"
8.5" × 11"
8.5" × 14"
Size