Battery Backup Unit Operations Screen - LSI iBBU01 User Manual

3.1.4.1 Setting Learn Cycle Properties
Figure 3.5

Battery Backup Unit Operations Screen

3-12
battery learn cycles, enable automatic learn cycles. To choose manual
battery learn cycles, disable automatic learn cycles.
If you enable automatic learn cyles, you can delay the start of the learn
cycles for up to 168 hours (7 days). If you disable automatic learn cycles,
you can start the learn cycles manually, and you can choose to receive
a reminder to start a manual learn cycle.
To set the learn cycle properties, perform the following steps:
1. Click the Physical tab to open the physical view.
2. Select the BBU icon in the left panel.
3. Click the Operations tab.
The BBU operations appear, as shown in
Using the Battery Backup Units
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
Figure 3.5.