Figure 2.1
LSIiBBU01 Intelligent Battery Backup Unit
The iBBU01 does not mount directly to the MegaRAID controller.
–
1 - J2 Battery Pack Harness Connector
–
2 - J14 Connector
–
3 - J1 Board-to-board Connector
–
4 - Battery Pack Harness
Instead, you can use the supplied 10-inch cable to connect the iBBU01
to a RAID controller, as shown in the example in
backup unit must be mounted inside the chassis within 12 inches of the
RAID controller.
Because server and workstation chassis vary from vendor to vendor,
there is no standard mounting option that is compatible with the various
system configurations. Therefore, the iBBU01 battery kit contains only
the battery and the cable, allowing value-added resellers (VARs) and
chassis manufacturers to customize the location of the remote battery to
provide the most flexibility within various environments.
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
Figure
2.2. The battery
2-3