Connecting Using A Board-To-Board Connector (Daughtercard) - LSI iBBU01 User Manual

2.4.1

Connecting Using a Board-to-Board Connector (Daughtercard)

•
Mode 1: The iBBU07 mounts directly to the following SAS RAID
controller using a small board-to-board connector (daughtercard):
– MegaRAID SAS 8880EM2
•
Mode 2: The iBBU07 supports remote connection to the following
SAS RAID controller using a 12-inch cable:
– MegaRAID SAS 8880EM2
Figure 2.11 displays the top view and the bottom view of the card. (The
"top" side is the side you can see after you install the iBBU07 on the
RAID controller.) Note that this unit combines a battery pack with a
daughtercard.
Figure 2.15 LSIiBBU07 and Components
LSIiBBU07 (bottom view)
3
2
LSIiBBU07 (top view)
4
– 1 - J4 Battery Pack Harness Connector
– 2 - J5 Board-to-board Connector
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
J2
J5
J4
1
85021-05
2-23