Installing The Megaraid Sas 8888Elp Raid Controller - LSI iBBU01 User Manual

As you press the iTBBU03 into the socket, it clicks into place when
it is correctly seated in the socket, and the arms on the sides of the
socket rotate into the notches on the sides of the iTBBU03 to hold it
securely in place.
6. Install the RAID controller in the computer as shown in
Press down gently, but firmly, to ensure that the RAID controller is
correctly seated in the slot. The bottom edge of the RAID controller
must be flush with the slot.
Caution: Never apply pressure to the iTBBU03 or to the DIMM when
inserting the SAS 8888ELP RAID controller. Instead, press
down only on the top edge of the RAID controller, as shown
in Figure
Figure 2.21 Installing the MegaRAID SAS 8888ELP RAID Controller
7. Attach the controller to the computer chassis with the bracket screw.
8. Attach the cables, as needed, to the connectors on the RAID
controller.
9. Reinstall the computer cover and reattach the power cord(s).
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
2.21.
Figure 2.21.
2-31