Related Publications
iv
•
Chapter 2, Installing the Battery Backup
install the BBU models.
•
Chapter 3, Using the Battery Backup
and monitor the BBU models and how to replace them.
•
Chapter 4, Battery Backup Unit
technical information and specifications for all BBU models.
MegaRAID SAS Software User's Guide
Document number: 80-00156-01 Rev. F
This document explains how to use the RAID system configuration,
monitoring, and management tools that MegaRAID provides for the SAS
RAID controllers. These tools include the BIOS-based MegaRAID
Configuration Utility and the WebBIOS Configuration Utility, as well as the
MegaRAID Manager operating system-based tool. The information in this
document is independent of the back-end bus and applies to both
MegaRAID SCSI RAID controllers and MegaRAID Serial ATA RAID
controllers.
MegaRAID SAS Device Driver Installation User's Guide
Document Number: 80-00163-01 Rev. C
This document describes how to install the MegaRAID device driver for
your operating system. The information in this document is independent
of the back-end bus and applies to the MegaRAID SAS RAID controllers.
MegaRAID 1078-based SAS RAID Controllers User's Guide
Document No. 80-00157-01 Rev. B
This document explains how to install your MegaRAID 1078-based SAS
RAID controller in a host system. In addition, it provides the electrical and
physical specifications, jumper definitions, and connector locations for
the 1078-based SAS RAID controllers.
Preface
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
Units, explains how to
Units, explains how to use
Specifications, has complete