Installing The Sas 8708Elp Raid Controller - LSI iBBU01 User Manual

2.2.2.2 Connecting to the MegaRAID SAS 8888ELP RAID Controller Using a Remote
Connector
Figure 2.9

Installing the SAS 8708ELP RAID Controller

Bracket Screw
Press Here
85008-05
Edge of
Motherboard
6. Attach the controller to the computer chassis with the bracket screw.
7. Attach the cables, as needed, to the connectors on the controller.
8. Replace the computer cover and reattach the power cords.
9. Turn on the power to the computer.
The iBBU05 does not mount directly to the SAS 8888ELP RAID
controller. Instead, use the supplied 12-inch cable to connect the iBBU05
to a RAID controller. The battery backup unit must be mounted inside
the chassis within 10 inches of the RAID controller.
Because server and workstation chassis vary from vendor to vendor,
there is no standard mounting option that is compatible with the various
system configurations. Therefore, the iBBU05 battery kit contains only
the battery and the cable, allowing VAR's and chassis manufacturers to
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
LSIiBBU05 (Top View)
Press Here
Edge of Motherboard
2-15