Table 3.1
Display BBU Information
Convention
MegaCLI -AdpBbuCmd -aN|-a0,1,2|-aALL
Description
Displays complete information about the BBU, such as status, capacity information,
design information, and properties.
3.1.2.2
Display BBU Status Information
Table 3.2
Display BBU Status Information
Convention
MegaCLI -AdpBbuCmd -GetBbuStatus –aN|-a0,1,2|-aALL
3-6
Use the command in
status of the BBU, such as temperature and voltage, for the selected
controller(s).
Using the Battery Backup Units
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
Table 3.2
to display complete information about the