Installing The Lsiibbu07; Connecting The Ibbu06 To The 8708Em2 Raid Controller - LSI iBBU01 User Manual

2.4

Installing the LSIiBBU07

2-22
3. Insert the battery pack harness connector at the end of the 5-pin
cable into the J4 connector on the backside of the iBBU06.
4. Connect the J2 connector on the iBBU06 to the J10 battery backup
connector of the RAID controller, as shown in
Use the supplied 20-pin, 10-inch cable to connect the iBBU06 to the
RAID controller.
There are black triangles on the connectors to help you install them
properly. Insert the cable connectors into the controller connector
and the iBBU connector so that the black triangles are aligned, as
shown in Figure
Figure 2.14 Connecting the iBBU06 to the 8708EM2 RAID
Controller
The iBBU07 LiON battery cell technology, can be used in two application
modes:
Installing the Battery Backup Units
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
2.14.
Figure 2.14.