2.2.1.2
Connecting to the MegaRAID SAS 8888ELP RAID Controller Using a Remote
Connector
Figure 2.5
Installing the MegaRAID SAS 8708ELP RAID Controller
Bracket Screw
Press Here
85008-05
Edge of
Motherboard
7. Attach the RAID controller to the computer chassis with the bracket
screw.
8. Attach the cables, as needed, to the connectors on the RAID
controller.
9. Replace the computer cover and reattach the power cords.
10. Turn on the power to the computer.
Important:
Refer to the MegaRAID SAS Software User's Guide for
information about running the RAID configuration utilities
and the MegaRAID SAS Device Drivers Installation User's
Guide for installing software drivers.
The iBBU05 does not mount directly to the SAS 8888ELP RAID
controller. Instead, use the supplied 12-inch cable to connect the iBBU05
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
LSIiBBU05 (Top View)
Press Here
Edge of Motherboard
2-9