Connecting The Ibbu07 Remotely To The 8880Em2 Raid Controller - LSI iBBU01 User Manual

2. Use the three Phillips-head screws that are provided to secure the
iBBU07 to the motherboard or the server chassis.
3. Insert the battery pack harness connector at the end of the 5-pin
cable into the J4 connector on the backside of the iBBU07.
4. Connect the J2 connector on the iBBU07 to the J10 battery backup
connector of the RAID controller, as shown in
Use the supplied 20-pin, 10-inch cable to connect the iBBU07 to the
RAID controller.
There are black triangles on the connectors to help you install them
properly. Insert the cable connectors into the controller connector
and the iBBU connector so that the black triangles are aligned, as
shown in Figure
Figure 2.18 Connecting the iBBU07 Remotely to the 8880EM2 RAID
Controller
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
2.18.
Figure 2.18.
2-27