Lsiibbu05 And Components - LSI iBBU01 User Manual

2.2.1.1 Connecting to the RAID Controller Using a Board-to-Board Connector
(Daughtercard)
2-6
Figure 2.3

LSIiBBU05 and Components

iBBU Bottom View
1
iBBU Top View
4
– 1 - J2 Battery Pack Harness Connector
– 2 - J1 Connector
– 3 - J14 Board-to-board Connector
– 4 - Battery Pack Harness
The first method for connecting the iBBU05 is to mount it directly to the
RAID controller using a small board-to-board connector known as a
daughtercard. Follow the steps in this section to install the iBBU05 on
the SAS 8704ELP or SAS 8708ELP.
If the RAID controller is already installed in a computer, follow these
steps to remove it before you install the iBBU05:
Installing the Battery Backup Units
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
J1
J2
2
3
J14
85006-00